No, because our Wire-Free devices are battery powered and can only control other C by GE devices, you cannot control them out-of-home. However, if you want out-of-home control for the other C by GE devices that are controlled by the Wire-Free device, you can enable this smart benefit with one of our Wi-Fi devices: Smart Plug, Wired Switch or C-Reach Smart Bridge.
No, because our Wire-Free devices are battery powered and can only control other C by GE devices, you cannot control them with a voice assistant. However, if you want voice control for the other C by GE devices that are controlled by the Wire-Free device, you can enable this smart benefit with one of our Wi-Fi devices: Smart Plug, Wired Switch or C-Reach Smart Bridge.
Our Wire-Free devices only work with other C by GE products.
No Wi-Fi needed. This device is battery operated and only Bluetooth is required.
It pivots and swivels with 105° wide-angle coverage of 20 ft.
Wire-free remotes, switches, and motion sensors are able to control the following C by GE devices: All C by GE Smart Bulbs (A19 and BR30 sizes), Light Strips, Smart Plugs, and Wired Switches (on/off, dimmers, and dimmers with motion sensors). Wire-free devices do not control Sols.
Simply by grouping the Wire-Free Switch and your other C by GE devices in the same room in the C by GE app.
Since wire-free products will control whatever is in the same Room in the C by GE app, you can move products in or out of the same Room as the Wire-Free device, or move the Wire-Free device itself into a different Room.
They can control up to 50 devices because this is the max number of devices you can have in one location.
No, these products are rated for indoor use only.
Wire-Free Switch and Remote = One CR2032 coin battery
Wire-Free Motion Sensor = Two AAA batteries
All Wire-Free devices have a 2+ year battery life.
Yes, the indicator light on the device will display red when the battery level is below 20%.
Instructions to replace the battery in our wire-free devices:
- Wire-Free Switches
- Wire-Free Remotes
- Wire-Free Motion Sensor
Wake up the devices and navigate to the Firmware Update page in the app to view and complete any available firmware updates for the devices. A firmware update is also performed (if needed) when the device is first set up in the C by GE app.
You can use the C by GE mobile app to delete the device from your account, which will factory reset it if you follow the instructions correctly. If you do not have access to the device in the app, you can also reset the devices using the pinhole reset button on each device.
The buttons are not able to be customized at this time.